
Set up your camera
1. Charge your camera until charge light turns white;
1.1. Make sure to update your camera’s firmware on first use;
2. Insert a compatible micro SD card;
3. Press the Power button to turn on your camera;
Choose lens mode
4. Push lens release button to automatically open lenses into 180° 3D mode
4.1 Pull the lenses back until click to close into 360° 2D mode
![]()
|
![]() |
Choose recording mode
5. Use a short press of the power button to switch between recording modes
Record
6. Press the shutter button to start/stop video recording or to capture a photo